POWER UNITS FOR DUMPING TRUCK COVERING

$122.3

≥1
Piece/Pieces

Min. Order:

1 Piece/Pieces

Contact Now

Product Description

Product Attributes
Supply Ability & Additional Information

< >

Overview

Product Attributes

Model No.: 1466

Supply Ability & Additional Information

Place of Origin: China

Double acting cylinder for operation of cover mechanism of dump truck. The opening and closing action of the cover is controlled by the AC hydraulic pump of the electromagnetic directional valve, and the speed is regulated by the throttle valve. Small Hydraulic Power Unit.

Logistics hydraulic Power Unit

sfg47 sfg48

Model and specification

type型号	electric machinery电机	pump delivery t泵排量（cc / r）	Tank volume y油箱容积（L）	pressure 压力（MPa）	install 安装方式	Oil port 油口尺寸	long（mm）
HPU2-49AEAIAHAFE（Y）G	DC12V2.0KW 2500转	2.1	3.5	20	水平的卧式	M14x1.5	478
HPU2-49BFA IBHAFE（Y）G	DC24V 2.2千瓦2700rpm		3.5	20			478
HPU2-49BHBIAHCFF（Y）G	DC24V 4.0千瓦3100rpm		4	20			553

Special notes

1. For pumps with different flow rates, pressure and motor power, please refer to the order guide.
2. The motor is based on the gap working system S2 = 2 ~ 4min (continuous working time), so it can not run continuously.
3. Before installation, the cylinder, oil pipe, joint and Other hydraulic components must be cleaned without any impurities.
4. The viscosity of hydraulic oil should be 15-68cst, and it should be clean and free of impurities. It is recommended to use HM46 hydraulic oil.
5. If you need emergency manual oil drain device, please indicate it when ordering.
6. After the first operation of the system, check whether there is enough oil in the oil tank immediately.
7. The hydraulic oil should be changed in the first 100 hours after the system is used, and then every 3000 hours.
8. Dump truck hydraulic valve

Product Categories : Hydraulic Power Unit

Hot Products

Email to this supplier

*Subject:
*To:

Mr. xueanzhi
*Email:
*Message:

Your message must be between 20-8000 characters