 HomeProductsHydraulic Power UnitTAILGATE LIFT POWER UNIT

Contact Supplier

Mr. xueanzhi

Leave a message

Contact Now

TAILGATE LIFT POWER UNIT

$316.4

≥1
Piece/Pieces

Min. Order:

1 Piece/Pieces

Contact Now

Product Description

Product Attributes
Supply Ability & Additional Information

< >

Overview

Product Attributes

Model No.: 259

Supply Ability & Additional Information

Place of Origin: China

The Hydraulic Power Unit adopts a closed structure, that is, the rear service hydraulic oil Power Unit, which is used for the steering and lifting control of the truck's rear baffle. AC hydraulic pump, expansion and descent speed is controlled by one-way throttle valve. Small hydraulic power unit.

Hydraulic Poppet Valve

sfg37 sfg38 sfg39

Hydraulic Pilot Valve

Model and specification

type型号

electric machinery电机

pump delivery

t泵排量（cc / r）

Tank volume

y油箱容积（L）

pressure

压力（MPa）

install

安装方式

Oil port

油口尺寸

HPU1-30AEAHAHDFKG

DC12V2.0Kw2500转

1.7

卧式

M14x1.5

（可定制Or

定制）

HPU1-30BFAKBHDFKG

DC24V 2.2千瓦2700rpm

2.5

Power Unit

Special notes

Hydraulic Power Station

1, For different flow rates of pumps, pressures and motor power, please see the ordering guide.

2. The motor is based on gap working system S2 = 2 ~ 4min (continuous working time), so it cannot run continuously.

3. Before installation, the cylinder, tubing, joints and Other hydraulic components must be cleaned without any impurities.

4, the viscosity of hydraulic oil should be 15-68CST, and should be clean without impurities, it is recommended to use HM46 hydraulic oil.

5. If emergency manual oil discharge device is needed, please indicate it at the time of reservation.

6. After the first operation of the system, check whether there is enough oil in the tank immediately.

7. The hydraulic oil shall be replaced after the first 100 hours * of use of the system and thereafter every 3,000 hours.

8. Hydraulic valve of dump truck

Hydraulic Pump Unit

Product Categories : Hydraulic Power Unit

Hot Products

Email to this supplier

*Subject:
*To:

Mr. xueanzhi
*Email:
*Message:

Your message must be between 20-8000 characters